T
The Model T Lathe is the essential solution for tool shops and workshops that need a versatile and easy-to-use machine.
The inverter integrated into the spindle motor allows for smooth speed adjustment, enabling continuous operation on different materials and geometries.
With a maximum turning length of 1500 mm, a turning diameter of 460 mm, and a 5.5 kW spindle motor, the Model T guarantees reliable and consistent performance.
The sturdy construction and clear operating layout allow for control and safety during daily operations, ensuring consistent results over time.
It is the ideal choice for workshops, maintenance departments, and laboratories seeking a practical, durable, and essential lathe without compromising on build quality.
- Infinitively variable spindle speed (Inverter)
| Technical Specifications | 180 | 215 | 230 | |
|---|---|---|---|---|
| HEIGHT OF CENTRES | mm | 180 | 215 | 230 |
| SWING OVER BED | mm | 360 | 430 | 460 |
| SWING OVER CROSS SLIDE | mm | 190 | 240 | 270 |
| DISTANCE BETWEEN CENTRES | mm | 1000 - 1500 | ||
| WIDTH OF BED | mm | 290 | ||
| SPINDLE BORE | mm | 52 | ||
| SPINDLE NOSE | Camlock | 6" | ||
| INFINITIVELY VARIABLE SPINDLE SPEED (inverter) | rpm | N° 6 RANGES FROM 60 UP TO 2000 RPM | ||
| MAIN MOTOR POWER | Kw | 4 [Opt. 5.5] | 5.5 [Opt. 7.5] | |
| RANGE OF LONGITUDINAL FEEDS | mm/rev | (38) 0.05 - 1.50 | ||
| RANGE OF TRANSVERSAL FEEDS | mm/rev | (38) 0.025 - 0.75 | ||
| RANGE OF THREADS METRIC | mm | (30) 0.45 - 20 | ||
| RANGE OF THREADS WHITWORTH | T.P.I. | (35) 80 - 1 3/4 | ||
| RANGE OF THREADS MODULE | mm | (25) 0.25 - 10 | ||
| RANGE OF THREADS DIAMETRAL PITCH | DP | (30) 160 - 3 1/2 | ||
| CROSS SLIDE TRAVEL (X-axis) | mm | 240 | ||
| TOP SLIDE TRAVEL | mm | 130 | ||
| TAILSTOCK QUILL DIAMETER | mm | 60 | ||
| TAILSTOCK QUILL STROKE | mm | 130 | ||
| TAILSTOCK QUILL INSIDE TAPER | Morse | 4 | ||
| Weight | 180 | 215 | 230 | |
|---|---|---|---|---|
| T x 1000 | Kg | 2000 | 2100 | 2200 |
| T x 1500 | Kg | 2300 | 2400 | 2500 |
| Optional | ||||
|---|---|---|---|---|
| SPINDLE BORE | ø mm | 65 | ||
Standard equipment
- Bed – Legs – Headstock – Tailstock – Carriages made of cast iron
- Bed guideways are induction hardened and ground
- Headstock with induction hardened and ground gears; spindle is assembled on high accuracy bearings
- Carriages are sliding on antifriction material
- Electric plant with low voltage control panel; it is placed in a suitable airtight cabinet. Make of components is Siemens and/or Schneider
- Spindle reduction sleeve
- 2 Dead centres
- Safety protections according to EC standards: Safety chuck guard with microswitch interlocked – Turret safety guard – Rear protection along full length of the machine – Protection of leadscrew and feed bars – Emergency stop button – Rope safety switch along the entire lenght of the lathe
- Chip tank
- Cooling system with electro-pump
- Central lubrication of guideways with automatic pump
- Steady rest and follow rest
- Service tools and wrenches
- Manuals
- Machine built according EC standards
- Infinitively variable spindle speeds
(inverter + potentiometre to increase/decrease spindle speed + rpm-counter display + brake resistor) - Air device on the tailstock to ease the displacement along bed
Optional equipment
- Manual tool holder turret: Squared (4-way tool post) – Quick change turret – Indexing turret – Multifix turret
- 3 or 4 jaw self centering chuck
- 4-jaw independent chuck
- Live centre
- 2 or 3 axis digital readout
- Steady rest with larger Ø than standard one
- 6 position longitudinal stop
- Thread chasing dial
- Work area lighting
- Cutting Surface Speed
- Powered small tool post
(Standard on mod. TC Megalos) - Powered displacement of tailstock along bed
(Standard on mod. TC Heavy Plus and TC Megalos) - Taper turning attachment
- Grinding equipment
- Levelling and anchoring pads
Would you like a quotation or more information for T?
Fill out the form, we will reply as soon as possible
